Published on Luglio 21st, 2014 | by Raffaella Capritti
0Via Isonzo (ex Via Provinciale, 85), 1 - 20060 Pessano con Bornago (MI) - ITALY
Phone 02 95.96.93.555
KONDENSA
Made in ItalyCondensing suspended gas warm air heater
Save from 35 to 50% of heating expenses with Kondensa modulating gas warm air Heaters
KONDENSA PLUS heaters have been designed and developed by ApenGroup’s R&D department combining premix gas burner and microprocessor-assisted electronic control technologies.
This results in a continuous adjustment of output power, and therefore of fuel consumption, to the heat request from the environment.
ADVANTAGES
Very high efficiency and very drastic reduction in gas consumption to – 50% due to:
Efficiency up to 105 % (referred to low calorific value).
Diminution of thermal stratification and subsequent reduction of thermal dispersion.
Power continuously regulated by microprocessor from 100 to 30% of its nominal value.
Low pollution due to:
- No carbon monoxide emissions – CO = 0.
- Very low azot oxyds emissions – NOx < 30 ppm.
- Reduced “Greenhouse effect” – reduced carbonic anhydride emissions – thanks to low combustible consumption and to high efficiency.
MAIN TECHNICAL CHARACTERISTICS
- Capacity range from 32 kW to 92 kW.
- Efficiency up to 105,5%.
- Energy-saving from 30% to 50%.
- Electronic card with continuous power modulating function from 26% to 100% controlled by microprocessor.
- Premixed gas burner with NOx less than 30 ppm and CO = 0.
- Reduced air stratification.
- INOX AISI 304L stainless steel heat exchanger and combustion chamber.
- Sealed combustion circuit.
- Safety Thermostat.
- Safety pressure switch.
- Operating both with natural gas and LPG.
- Chronotermostat.
- CE approval (0694BM3433) in accordance with all existing norms.
Fill out the form to request information from APENGROUP S.P.A.
Other Products by APENGROUP
